The 1525 Diamond Edge Polisher will convert a sawn thermoplastic sheet edge to a brightly polished surface in one operation - and is small enough to fit on a workbench.

The machine uses one polycrystalline (man made) and one natural diamond to remove 0.50mm (0.020") from the edge of material up to 25 mm thick. The polycrystalline tool removes all cutting marks and the natural diamond tool follows, giving the edge a clear polished finish. The 1525 uses the diamond tooling technology developed on our established 1550 machine to produce a high gloss finish with a minimum of machining marks.

As the 1525 removes material it generates swarf. This must be extracted to prevent any damage to the machine. The machine is fitted with an Extraction port, which can be connected to any suitable vacuum source. Alternatively, we also offer our integrated Extraction Unit, the 1525E. This combines a phase-invertor controlled side channel blower unit with a collection bin and 3-stage filtration.

In common with all cutting tools, diamond tooling must be sharpened periodically. We offer Service Exchange Cutter Hubs, which are normally despatched within 24 hours of request . This gives the customer a fixed-cost replacement cutter hub every time. For customers who cannot afford any downtime, spare cutter hubs are also available.